#617279 License Plate
1988 CADILLAC Brougham
Delaware, US
Rate driver
0
0
Overview
The license plate number #617279 belongs to a CADILLAC Brougham (1988 model) and is registered in Delaware as a passenger car manufactured by GENERAL MOTORS LLC. The vehicle has a standard license plate attached to the rear of the vehicle. The license plate #617279 was first searched on LookupAPlate on April 05, 2025, and it currently has no community reports. You can find the detailed report of the vehicle below.
Specifications
General
Make
CADILLAC
Manufacturer Name
GENERAL MOTORS LLC
Model
Brougham
Model Year
1988
Plant City
DETROIT
Vehicle Type
PASSENGER CAR
Plant Country
UNITED STATES (USA)
Plant Company Name
Cadillac Amsterdam Street plant
Plant State
MICHIGAN
Engine
Engine Number of Cylinders
8
Displacement (CC)
5000
Displacement (CI)
305.1187204736
Displacement (L)
5
Fuel Type - Primary
Gasoline
Engine Configuration
V-Shaped
Engine Manufacturer
BOCL
Exterior Body
Body Class
Sedan/Saloon
Doors
4
Mechanical / Drivetrain
Drive Type
RWD/Rear-Wheel Drive
Exterior Dimension
Gross Vehicle Weight Rating From
Class 1: 6,000 lb or less (2,722 kg or less)
Gross Vehicle Weight Rating To
Class 1: 6,000 lb or less (2,722 kg or less)
Passive Safety System
Seat Belt Type
Manual
License Plate 617279
The vehicle owner(s) information for the 1988 CADILLAC Brougham with license plate 617279 may be available through our data provider. Click the button below to start your free search.
There are no reports against the license plate
#617279. Feel free to add your
feedback under the "Add Report" tab.
To request removal or report a particular comment, please visit our
opt-out page. The comment(s) and media on this page are user-generated and do not reflect our views.
Showing 9 recalls
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS (91V101000)
Received on 14/06/1991
Make
CADILLAC
Model
BROUGHAM
Notes
SYSTEM: HYDRAULIC BRAKES; FMVSS 105.VEHICLE DESCRIPTION: REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FORPROPER BRAKING.
Remedy
REPLACE ORIGINAL 1" REAR WHEEL BRAKE CYLINDER WITH A 1 1/16" CYLINDER.
Component
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS
ModelYear
1988
Conequence
STOPPING DISTANCE REQUIREMENTS OF FMVSS 105 ARE NOT METWITH POWER BRAKING ASSIST UNIT INOPERATIVE.
Manufacturer
ALLEN COACHWORKS
ReportReceivedDate
14/06/1991
NHTSACampaignNumber
91V101000
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS (91V100000)
Received on 14/06/1991
Make
CADILLAC
Model
BROUGHAM
Notes
SYSTEM: HYDRAULIC BRAKES; FMVSS 105.VEHICLE DESCRIPTION: REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FORPROPER BRAKING.
Remedy
REPLACE ORIGINAL 1" REAR WHEEL BRAKE CYLINDER WITH A 1 1/16" CYLINDER.
Component
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS
ModelYear
1988
Conequence
STOPPING DISTANCE REQUIREMENTS OF FMVSS 105 ARE NOT METWITH POWER BRAKING ASSIST UNIT INOPERATIVE.
Manufacturer
DABRYAN COACH BUILDERS
ReportReceivedDate
14/06/1991
NHTSACampaignNumber
91V100000
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS (91V096000)
Received on 14/06/1991
Make
CADILLAC
Model
BROUGHAM
Notes
SYSTEM: HYDRAULIC BRAKES; FMVSS 105.VEHICLE DESCRIPTION: LIMOUSINE CONVERSIONS.
Remedy
REPLACE ORIGINAL 1" REAR WHEEL BRAKE CYLINDER WITH A 1 1/16" CYLINDER.
Summary
REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FOR PROPER BRAKING.
Component
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS
ModelYear
1988
Conequence
STOPPING DISTANCE REQUIREMENTS OF FMVSS 105 ARE NOT METWITH POWER BRAKING ASSIST UNIT INOPERATIVE.
Manufacturer
ULTRA LIMOUSINES
ReportReceivedDate
14/06/1991
NHTSACampaignNumber
91V096000
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS (91V094000)
Received on 14/06/1991
Make
CADILLAC
Model
BROUGHAM
Notes
SYSTEM: HYDRAULIC BRAKES; FMVSS 105.VEHICLE DESCRIPTION: LIMOUSINE CONVERSIONS.
Remedy
REPLACE ORIGINAL 1" REAR WHEEL BRAKE CYLINDER WITH A 1 1/16" CYLINDER.
Summary
REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FOR PROPER BRAKING.
Component
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS
ModelYear
1988
Conequence
STOPPING DISTANCE REQUIREMENTS OF FMVSS 105 WERE NOT METWITH POWER BRAKING ASSIST UNIT INOPERATIVE.
Manufacturer
LIMOUSINE WERKS, INC.
ReportReceivedDate
14/06/1991
NHTSACampaignNumber
91V094000
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS (91V093000)
Received on 14/06/1991
Make
CADILLAC
Model
BROUGHAM
Notes
SYSTEM: HYDRAULIC BRAKES; FMVSS 105.VEHICLE DESCRIPTION: LIMOUSINE CONVERSIONS.
Remedy
REPLACE ORIGINAL 1" REAR WHEEL BRAKE CYLINDER WITH A 1 1/16" CYLINDER.
Summary
REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FOR PROPER BRAKING.
Component
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS
ModelYear
1988
Conequence
STOPPING DISTANCE REQUIREMENTS OF FMVSS 105 ARE NOT METWITH POWER ASSIST BRAKING UNITS INOPERATIVE.
Manufacturer
ROYALE LIMOUSINE MFRS.
ReportReceivedDate
14/06/1991
NHTSACampaignNumber
91V093000
VEHICLE SPEED CONTROL (89V102000)
Received on 16/06/1989
Make
CADILLAC
Model
BROUGHAM
Notes
SYSTEM: CRUISE CONTROL.VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH CRUISE CONTROL ANDCERTAIN GASOLINE AND DIESEL ENGINES.
Remedy
INSTALL A NEW BUSHING IN CRUISE CONTROL SERVO BAIL.
Summary
A SMALL NYLON BUSHING IN THE CRUISE CONTROL SERVO BAIL MAY SLIP OUT OF PLACE, CAUSING INTERMITTENT AND UNEXPECTED INCREASES IN ENGINE SPEED OR DIESELING (ENGINE RUN ON WITH IGNITION OFF).
Component
VEHICLE SPEED CONTROL
ModelYear
1988
Conequence
SERVO ROD ASSEMBLY COULD CATCH ON ENGINE COMPONENTS ANDRESULT IN A STUCK THROTTLE WITH POTENTIAL FOR A VEHICLE CRASH.
Manufacturer
GENERAL MOTORS CORP.
ReportReceivedDate
16/06/1989
NHTSACampaignNumber
89V102000
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM (91V011000)
Received on 11/01/1991
Make
CADILLAC
Model
BROUGHAM
Notes
SYSTEM: HYDRAULIC BRAKES; FMVSS 105.VEHICLE DESCRIPTION: 60 INCH ADDED STRETCH LIMOUSINES.
Remedy
REPLACE ORIGINAL REAR WHEEL BRAKE CYLINDER WITH A LARGER CYLINDER.
Summary
LIMOUSINE FAILED TO MEET STOPPING DISTANCE REQUIREMENTS OF FMVSS 105.
Component
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM
ModelYear
1988
Conequence
INCREASED STOPPING DISTANCE COULD RESULT IN AN ACCIDENT;VEHICLES DO NOT COMPLY WITH FMVSS 105.
Manufacturer
MOLONEY COACH BUILDERS
ReportReceivedDate
11/01/1991
NHTSACampaignNumber
91V011000
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS (92V152000)
Received on 20/10/1992
Make
CADILLAC
Model
BROUGHAM
Notes
SYSTEM: BRAKES; REAR BRAKE CYLINDERS; FMVSS 105.VEHICLE DESCRIPTION: STRETCH LIMOUSINE CONVERSIONS.
Remedy
REPLACE THE EXISTING REAR WHEEL BRAKE CYLINDERS WITH LARGER DIAMETER BRAKE CYLINDERS.
Summary
THE INCREASED WEIGHT OF THE STRETCH CONVERSION LIMOUSINES REQUIRES LARGER DIAMETER REAR WHEEL BRAKE CYLINDERS THAN THOSE INSTALLED IN THE FACTORY.
Component
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:WHEEL CYLINDERS
ModelYear
1988
Conequence
THE VEHICLES DO NOT MEET THE STOPPING DISTANCEREQUIREMENTS OF FMVSS 105, "HYDRAULIC BRAKE SYSTEMS".
Manufacturer
NATIONAL COACH ENGINEERIN
ReportReceivedDate
20/10/1992
NHTSACampaignNumber
92V152000
SEAT BELTS:FRONT:RETRACTOR (87V185000)
Received on 04/12/1987
Make
CADILLAC
Model
BROUGHAM
Notes
SYSTEM: REAR SEAT BELTS/FMVSS NO. 209VEHICLE DESCRIPTION: PASSENGER CARS.
Remedy
REPLACE REAR SEAT SHOULDER BELT RETRACTOR ASSEMBLY, AS NECESSARY.
Summary
REAR SEAT BELT SHOULDER RETRACTOR ASSEMBLY MAY NOT LOCK WHEN SUBJECTED TO THE ACCELERATION REQUIRED BY FMVSS NO. 209.
Component
SEAT BELTS:FRONT:RETRACTOR
ModelYear
1988
Conequence
THIS INCREASES LIKELIHOOD OF INJURY TO SEAT OCCUPANT.VEHICLES DO NOT COMPLY WITH FMVSS NO. 209.
Manufacturer
GENERAL MOTORS CORP.
ReportReceivedDate
04/12/1987
NHTSACampaignNumber
87V185000
If you were injured in an incident involving #617279 or any other vehicle in Delaware, an experienced auto accident attorney can help you get the justice and settlement you deserve.
Call Now for a Free Consultation:
(858) 838-4451 Dedicated Delaware Line
✅ No upfront costs
✅ No obligation
✅ Fast & Easy Process